| All test-through and return hoses, as well as the
inflation fittings, are mounted in the lid as standard
equipment in most sizes. Optional acid, hydrocarbon or
other covers are available. 1: Ozone protected rubber cover 2: Various layers of bias cords (hand-lay-up) 3: Left hand bias cord 4: Right handed bias cord 5: Third ply bias cord in larger sizes 6:"Wrapped finish" imprint for a non-skid surface 7: Spider ring impregnated with tire cord reinforcement 8: Bolt base plate 9: "Lid" with various inflation and test through fittings 10: Three "large -eye" eye bolts for handling the domehead plug 11: Test area hoses |
Back to Sewer Plugs page....